© 2024 Kansas Public Radio

91.5 FM | KANU | Lawrence, Topeka, Kansas City
96.1 FM | K241AR | Lawrence (KPR2)
89.7 FM | KANH | Emporia
99.5 FM | K258BT | Manhattan
97.9 FM | K250AY | Manhattan (KPR2)
91.3 FM | KANV | Junction City, Olsburg
89.9 FM | K210CR | Atchison
90.3 FM | KANQ | Chanute

See the Coverage Map for more details

FCC On-line Public Inspection Files Sites:
KANU, KANH, KANV, KANQ

Questions about KPR's Public Inspection Files?
Contact General Manager Feloniz Lovato-Winston at fwinston@ku.edu
Play Live Radio
Next Up:
0:00
0:00
0:00 0:00
Available On Air Stations

A misplaced arm position can skew blood pressure readings

A patient's arm should be supported at around heart level when taking blood pressure readings.
Tunvarat Pruksachat/Moment RF
/
Getty Images
A patient's arm should be supported at around heart level when taking blood pressure readings.

Think back to the last time you had your blood pressure taken.

How were you sitting? Where exactly was the cuff? And what specifically was your arm doing?

It’s such a familiar ritual of going to the doctor’s office that most of us scarcely think about the ins and outs, but in reality even small missteps can leave you with an inaccurate reading.

Research has shown that can happen for all kinds of reasons. The cuff size may be incorrect. A patient’s legs are crossed or dangling from the exam table. Simply the stress of being in the clinic, what’s known as “white coat hypertension,” can spike the numbers.

Now add to the list a relatively common faux pas: holding your arm in the wrong position.

A trial from researchers at Johns Hopkins University found that simply deviating from the guidelines for arm position can produce an overestimate of a patient’s blood pressure.

The inflated readings might be substantial enough to even lead to a misdiagnosis of hypertension and decisions to start medication, says Dr. Tammy Brady, a professor of pediatrics at Johns Hopkins University School of Medicine and senior author of the study, which was published in JAMA Internal Medicine on Monday.

“People take blood pressure screening for granted,” says Brady, “But a lot of decisions are made based on what that reading is on the device.”

In the trial, more than 130 adults had their blood pressure measured in three different scenarios, all using an automated device.

The first stuck to the guidelines: Their arm was supported, in this case resting on a desk, with the cuff positioned at about heart level on their arm.

The other two, however, strayed from the protocol in ways that Brady sees quite often in clinical practice, with the arm either resting on the patient’s lap or hanging at their side. Both positions produced substantial overestimates of blood pressure.

A patient’s arm resting in their lap could erroneously bump up both the top and bottom number — known as the systolic and diastolic pressure respectively — by about 4 millimeters of mercury (mmHg), which is the unit of measurement for blood pressure.

The phenomenon was even more pronounced when the arm was resting at their side. That position increased the systolic by 6.5 mmHg, and the bottom by 4.4 mmHg.

While it may not sound like a huge swing, it’s concerning that a data point used to evaluate risk for cardiovascular disease could be misleading because of such a preventable oversight.

For example, a patient whose systolic blood pressure is 128 mmHg — which is in the elevated range between 120 and 129 — a misplaced arm could inadvertently lead them to be classified as solidly in the hypertensive range, which starts at 130.

“This is very basic, but hopefully reminds everybody it really does matter,” says Brady, whose team has conducted several studies on how blood pressure readings can go awry, “Somebody could be prescribed medication who doesn't need it at all.”

Guidelines for measuring blood pressure outline a series of steps for getting the most accurate reading: It’s supposed to be quiet, the patient needs to wait five minutes before the measurement is taken, go to the bathroom ahead of time, keep their feet flat on the floor, their back should be supported, among other requirements.

“Even though we’ve known what to do for a long time, implementing all of this in a real world setting has been tricky,” says Dr. Stephen Juraschek, director of the Hypertension Center at Beth Israel Deaconess Medical Center in Boston.

It’s no surprise that some of these details fall by the wayside in the daily rush to see patients, but research also suggests new physicians aren’t being trained well enough. Another major obstacle is the layout of the exam rooms themselves, which often doesn't make it easy for blood pressure to be taken properly. (Even Brady says she has to do some rearranging of the furniture before seeing patients.)

Juraschek says this latest research makes it abundantly clear that proper arm position is “essential.”

In his experience, a dangling arm is usually not an isolated problem. These errors can cluster together and compound the inaccuracies.

“I've seen people with a net reduction of like 20 mmHg,” he says, “We're talking about a decision to start or not start therapy, so I think when you start adding up all of these features, it can really have a consequential impact on patients.”

Copyright 2024 NPR

Will Stone
[Copyright 2024 NPR]